CIPP – Automatic Cleaning In Place CIP Units

CIPP – Automatic Cleaning In Place CIP Units

Managed by a PLC on HMI with colours touch screen 12” where is possible to control in real time the state of valves, the state of pumps, the temperatures, the instant flow, the tanks level, the percentage of solutions, the state of PLC, etc.

In addition, the plant can be operated in “manual / semi-automatic”, password protected mode, in which the operator can force / enable / disable / modify each component of the P&ID.
This mode is primarily used for acting in an appropriate manner in case of emergency but still permits to a skilled operator to work completely independently from automation.

With the following main features:

  • Automatic restoring of the levels, of the temperatures and of the concentration of solutions.
  • 10 recipes, with the following phases:
    • first rinse with water recovered from previous final rinse.
    • basic washing with solutions recovery/recirculation/discharge.
    • intermediate rinse.
    • Acid washing with solutions recovery.recupero/recirculation/discharge.
    • intermediate rinse.
    • sanitazing washing with solutions recovery/recirculation/discharge.
    • Final rinse with clean water recovery.Modify the flow.
  • Modify the heating temperature of each phase.
  • Modify the washing times of each phase.
  • Skip one or more phases.
  • Set a pause time of the delivery between one phase and the next.
  • Automatic delivery line with automatic flow regulation.
  • Automatic return line with:
    • recovery of high charged solution.
    • recirculation on low charged solutions (return to remote utilities).
    • discharge of wasted solutions.
    • recovery of clean water.
    • recirculation of wasted water (return to remote utilities).
    • discharge of wasted water.
    • start of counting of the chemical washing time only when the solutions return to CIP.

TABEL

MODELCAPACITYPOWER CONSUMPTIONUSEFUL PRESSURE [bar]HEATING CAPACITY
CIPP1515000 L/h4 kW2,8 < 3,2 < 3,4192 kW
CIPP2020000 L/h5,5 kW3,3 < 3,8 < 3,9302 kw

Table options tanks of C.I.P. plants

MODELQUANTITY/CAPACITYPRODUCTS
CIPP15N° 1 tank divided in half
  1. Basic solution
  2. Acid solution
CIPP15N°4 tanks
  1. Basic solution
  2. Acid solution
  3. Disinfectant solution
  4. Water recovered from the previous cycle
CIPP20N° 3 tanks
  1. Basic solution
  2. Acid solution
  3. Water recovered from the previous cycle
CIPP20N° 4 tanks
  1. Basic solution
  2. Acid solution
  3. Disinfectant solution
  4. Water recovered from the previous cycle
CIPP20N° 5 tanks
  1. Potable water
  2. Basic solution
  3. Acid solution
  4. Disinfectant solution
  5. Water recovered from the previous cycle